Immaculate condition and ready to ride. This perfect example of a CB1000 comes with a full akrapovic exhaust system and rapid bike EVO. Priced to sell, get in quick. Call us on 02 4862 1600 or come in and see the team today!
2018 HONDA CB1000R
Honda’s venerable CB1000R sport standard turns an important corner for 2018, with a ground-up redesign that bridges the gap between performance and bare-boned Café Racer inspirations. In a dramatic identity shift, the CB1000R receives cutting-edge Neo-Sports Café styling, an updated chassis, and an improved electronics package—all changes that bolster performance while highlighting the importance of a strong, emotional connection between rider and machine.
The 2018 CB1000R’s 998cc DOHC four-cylinder engine—which shares its architecture and layout with the previous-generation CBR1000RR super sport bike—has been reworked to provide healthy increases in power and torque. Compression ratio is up 0.4 to 11.6:1 and the pistons are now forged (rather than cast), as with the CBR1000RR SP.
Development concentrated on improved gas flow into, through, and out of the cylinder head. Valve lift is higher, with inlet at 8.5mm and exhaust 8.1mm (as opposed to 7.9 and 7.8mm). A 44mm diameter throttle body (up 8mm) feeds larger-diameter inlet ports; the shape of the combustion chambers is also revised. The airbox, ducting, and air filter are also brand new and present a much simpler, smoother route for airflow into the engine, reducing pressure loss all the way from the outer ducts to the throttle body.
A new 4-2-1 design exhaust system adds to the CB1000R’s midrange muscle, and a link pipe joins the two main pipes just before the catalyzers, boosting torque at 5,000 rpm and above.
Throttle By Wire (TBW) has also been added to the platform, allowing the rider various options for utilizing the powerful engine, via three preset riding modes plus 1 USER mode (selected from a switch on the left handlebar).
There are three levels of Engine Power (P), Engine Brake (EB), and Honda Selectable Torque Control (HSTC) available; HSTC can also be switched off. The three individual riding modes offer different combinations of each parameter.
RAIN mode employs the lowest Power setting, medium EB, and high HSTC. The lower levels of power and torque are focused on the first three gears. STANDARD mode uses the middle setting for Power, HSTC, and EB. It reduces output a bit in first and second gears and uses a power curve that sits just below that of SPORT mode, with reduced torque at partial throttle openings. It also allows for small rear-wheel slides and the front wheel leaving the ground. SPORT uses high Power and lowest levels of EB and HSTC to deliver 100% power through all six gears, maximum torque at all throttle positions, and minor intervention from HSTC. The USER mode allows the rider to choose between the three settings for each parameter and save the setting for future use.
This CR1000R is in immaculate condition and has a full akrapovic exhaust and a rapid bike EVO. Give us a call or pop in and saee the team today!!